View larger Apollo XP95 55000-400 Standard Temperature Detector Part No. BF302XPH

Apollo XP95 55000-400 Standard Temperature Detector
Part No. BF302XPH

A high quality Type A2S standard temperature (55°C) heat detector Fully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire Panels.Monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.Responds well to flaming fires with high heat output.Typically used in areas where smoke detectors cannot be installed such as kitchens.Red LED illuminates when the detector is in alarm.Certified to EN54-5 by the LPCB.Requires a BF308XP standard base or BF308XPR low power relay base.'Xpert' card addressed for speedy installation.
Approvals/certificationsCertified to EN54-5 by the LPCB.CompatibilityCompatible with C-TEC's XFP/ZFP XP95/Discovery Addressable Fire Panels.Application/operationMonitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. Provides a good response to flaming fires with high heat.Application temperature25°C typical, 50°C max.Static response temperature54°C typical, 70°C max.Supply wiring2-wire, polarity insensitive.Supply/operating voltage17 to 28V DC.Quiescent current250µA average; 500µA peak.Alarm current2mA (LED illuminated).IndicatorsClear LED emitting red light when in alarm.ConnectionsL1&L2 supply in/out; +R remote LED +Ve connection; -R remote LED -Ve connection. (4mA remote LED current @ 5V measured across remote load).Product dimensions (mm)100mm diameter x 42 mm H (not in base). 50mm height when in base.Construction & finishWhite polycarbonate V.O rated rated to UL94. Stainless steel terminals.IP RatingIP43.Weight105g (not in base); 157g (in base).Operating conditions/temperature-20ºC to +70ºC.NotesRequires a BF308XP standard base or BF308XPR low power relay base. 1mA power up surge current for 0.3 seconds.

www.ipcctvbd.com
01818269935